Page 13 of 15 FA69397–2 English
Jun 2013
15
How To Use the USB Connection
Linx 5900 & 7900
If necessary, you can press the Stop key to cancel the back-up operation. An
information page confirms that the operation has failed.
Figure 14. Printer backup failed message
Press the Exit key to return to the USB page.
When the back-up operation is complete, a confirmation page is displayed.
Figure 15. Printer backup complete message
3 Press the Exit key to return to the USB page.
4 Press the Restore Printer from USB key to show a list of current back-ups from
printers (see Figure 16 on page 14.).
If a back-up operation fails for any other reason (for example if the operation is
cancelled by the operator or if the memory stick becomes full), the printer displays
an information message (see Figure 14). The back-up is identified on the memory
stick as not complete and you cannot restore that back-up to the printer.
To Next Page
Loading...
