How to set up Linx Insight
Linx Insight® is a built-in remote web interface for message download and control. Linx Insight® enables you to remotely
monitor and control your Linx 5900* or 7900 printer through a web browser from a PC or a web-enabled phone.
Assign a static IP address to the printer. If you are unsure, contact your network administrator. On the printer, navigate to the
IP Address screen (Menu > Setup > Communications > Ethernet Setup > IP Address) and enter the static IP address.
1
PC
Use the ethernet connection on the rear of the printer to connect the printer to your network.
2
On your PC, type the printer IP address into
a web browser.
3
You can now control the printer remotely.
5
When prompted, enter the following:
Username: linx
Password: insight
4
Make sure your phone is able to access the same
network as the printer. On your phone, type the printer
IP address into a web browser.
3
You can now view status information about the printer.
5
When prompted, enter the following:
Username: linx
Password: insight
4
Web-enabled phone
Supported web browsers: Internet Explorer® 8 and 9. Firefox® FF8 and FF9. Chrome™ 14 and 15. Safari® 5.
Supported mobile browsers: iPhone® 3GS, 4, 4S browsers. Android™ browsers for Android 2.2 and 2.3 Gingerbread. BlackBerry® 6 and 7.
* Linx Insight® is not included as standard on the Linx 5900 printer but is available as a configuration option. Contact your local Linx Distributor for more information.
Linx and Linx Insight are registered trademarks of Linx Printing Technologies Ltd. iPhone and Safari are registered trademarks of Apple Inc. Android and Chrome are trademarks of Google Inc.
BlackBerry is a registered trademark of Research In Motion Limited. Internet Explorer is a registered trademark of Microsoft Corporation. Firefox is a registered trademark of Mozilla Foundation.
MP65946–2
To Next Page
Loading...
