Page 2 of 19 FA69342–2 English
Jun 2013
19
How To Change the System Setup
Linx 5900 & 7900
1 Introduction
This document describes the Line setup options and the Installation setup options for the
5900 and 7900 printers.
The following options are described:
Options in the Line Setup menu
• Trigger setup
• Line speed
• Alarm setup
Options in the Setup menu
• Installation options
• Security options
You need a User Level C password to change some parameters.
For information about the serial communications interface and the Parallel IO interface,
refer to the Linx Remote Communications Interface Reference Manual and How To Use the Parallel
I/O Option.
1.1 Health and Safety
Make sure that you read and understand the Health and Safety information in the ‘Safety’
section of the Linx 5900 & 7900 Quick Start Guide.
To Next Page
Loading...
