In the SUPERVISOR MENU the operator can access the following options:
• Calibration check
• Calibration adjustment
• Wireless
• Set time and date
• Set Language (English, French, German, Italian & Spanish)
• Information
• Database
• Delete Database
• LCD Contrast
• Switch Off
• Exit to Operator Menu
The SUPERVISOR MENU may be protected by a PIN. This PIN and each of
the features that may be available are enabled or disabled through the
configuration application.
Features within this menu may be disabled and may not appear.
These verification and adjustment operations must be conducted by
trained, competent persons.
PIN Entry
When requested to enter the four-digit PIN number, use the Left and Right
buttons to select the individual numbers and select them using the
Confirm / Action Button (C). Once all four digits are selected correctly, the
screen will display a TICK mark to confirm successful input of the PIN and
will then display the software version fitted to the instrument before
displaying the first option in the SUPERVISOR MENU.
Please contact your supervisor for the PIN number setting.
To Next Page
Loading...
