Need help?Do you have a question about the LION Alcolmeter 700 and is the answer not in the manual?
General| Brand | LION |
|---|---|
| Model | Alcolmeter 700 |
| Category | Test Equipment |
| Language | English |
Explains how the instrument uses a fuel cell sensor to measure alcohol concentration.
Illuminates the mouthpiece port for better visibility during use.
Visual indicators showing test success or failure.
Primary button for powering on/off and navigating functions.
Buttons used for scrolling through menus and options.
Shows instructions, readings, and power status.
Provides audible alerts and tone messages to the operator.
Entrance for breath sample to detector and flow sensor.
Hygienically wrapped, single-use part for breath sampling.
Protects the instrument from shock during use.
Provides protection against dirt and shock during use.
Houses the AA batteries providing power for tests.
Outlines the sequential steps for conducting a breath test.
Explains how to select between Mouthpiece, Cup, and Sniffer test modes.
Quantitative breath test using a mouthpiece.
Indicative test using a cup for rapid screening.
Samples ambient air or liquid for indicative alcohol presence.
Instructions for attaching a new mouthpiece for a test.
Instructions for attaching and using a test cup.
Details how to conduct a sniffer test without subject cooperation.
How to instruct the subject and collect the breath sample.
Covers result display, preparing for next test, and powering down.
Explains warnings for insufficient sample or suck back.
Describes how to manually activate the sampling mechanism.
Explains how to access various instrument functions via menus.
How to access and scroll through the test result database.
Details the process of entering a PIN for menu access.
How to adjust the instrument's time, date, and language.
Selecting between Wet or Dry alcohol standards for calibration.
Performing a calibration check to verify instrument accuracy.
Adjusting the instrument's calibration using a standard.
Automatic shutdown to conserve battery life after inactivity.
Red and green LEDs indicate pass or fail status.
Heats the fuel cell neck to prevent condensation at low temperatures.
How to connect the instrument to a printer for results.
Messages indicating critical failures requiring immediate action.
Explains meanings of specific error codes for service.
Messages indicating issues that do not affect operation or accuracy.
Instructions for cleaning the instrument with a damp cloth.
Guide on replacing the AA batteries correctly.
Key actions to perform for correct instrument operation.
Actions to refrain from to prevent damage or incorrect results.
To Next Page
