Need help?Do you have a question about the LION alcolmeter 500 and is the answer not in the manual?
General| Brand | LION |
|---|---|
| Model | alcolmeter 500 |
| Category | Test Equipment |
| Language | English |
The smaller button for powering the instrument ON/OFF and handling refusals.
The larger button for manual sampling and calibration operations.
Illuminated display for instructions, readings, and battery status.
Audible tone messages to the instrument operator and subject.
Port for breath entry into the instrument's detection system.
Hygienic, single-use mouthpieces for breath sampling.
Protective pouch for the instrument during operational use.
Details on the instrument's battery compartment and power source.
Port for connecting printer, PC, and charger.
Detailed instructions for conducting a breath test on a subject.
A concise overview of the breath test steps and actions.
Procedures for logging and managing insufficient or refused breath samples.
Instructions for performing manual breath sampling if enabled.
How to access and display the result of the most recent breath test.
Explanation of the instrument's automatic power-off feature.
Messages that cause the instrument to power down and require immediate action.
Messages indicating issues that do not halt instrument operation.
Guidelines for safely cleaning the alcolmeter instrument.
Procedures for replacing the instrument's disposable AA batteries.
Instructions for recharging the optional rechargeable power unit.
Explains the importance and recommended frequency of calibration checks.
Description of the AlcoCal® gas standard used for calibration.
Details on the connector tube used with the AlcoCal® standard.
How to enter and utilize the Calibration CHECK mode.
Step-by-step instructions for performing a calibration check.
Defines the acceptable range for calibration check results against the standard.
Information stored regarding the last calibration check performed.
Overview of the functions and utilities available to supervisors.
Instructions on how to navigate and enter the supervisor menu.
Guide to selecting options and sub-options within Data Management.
Displays a single-screen summary of all stored breath test records.
Displays a line-by-line record of each subject breath test held in memory.
Procedure for transferring stored breath test data to a computer.
Enables the supervisor to erase all data from the instrument's memory.
Key information regarding instrument setup for calibration.
Entering and understanding the mode for adjusting instrument calibration.
Instructions for preparing and using the AlcoCal® standard for calibration.
Step-by-step process to adjust the instrument's calibration accuracy.
Information relating to the date of the last calibration adjustment.
General requirements and precautions for medical electrical equipment regarding EMC.
Guidance and declaration for electromagnetic emissions compliance.
Notes on electromagnetic immunity, separation distances, and usage.
To Next Page
