Horn/Whistle - To sound the whistle, firmly press the Horn/Whistle button.
The whistle will sound for as long as you continue to depress the button. It will
stop when you release the button.
Direction - Your train is programmed to start in neutral. The train will always
cycle neutral-forward-neutral-reverse with each press and release of the direction
button. The engine is programmed to restart in neutral each time the track
voltage is turned off for 25 seconds or more.
Fig. 7: Manual Volume Control
®
Proto-Sound 3.0 features are activated by sequences of Bell and Horn button
pushes described below. Please read the full descriptions of each feature before
using it. To use these buttons to activate features rather than to blow the horn or
ring the bell, you should tap the buttons very quickly with a ½-second pause between
button presses. You may need to practice your timing to make this work smoothly.
Manual Volume Control
To adjust the volume of all sounds made by this engine, turn the manual volume
control (fig. 7) clockwise to increase the volume and counterclockwise to reduce
the volume. Turning the manual volume control completely counterclockwise
will turn of all of the engine sounds and announcements.
Timing Chart
Total Time Lapse: 1 Seconds½
Press
Horn
Short &
Firm
½ Sec.
Pause
½ Sec.
Pause
Press
Bell
Short &
Firm
Press
Bell
Short &
Firm
Lionel Corporation No. 255, 260 & 263 Steam Engines with Proto-Sound® 3.0
9
Cycle Phases
Neutral
Neutral
ForwardReverse
260 Style Tender
263 Style Tender
PS3.0 Manual Volume Control
PS3.0 Manual Volume Control