Lionel Auto Crossing Gate - Table of Contents

C
ongratulations on your purchase of the Lionel Auto Crossing Gate. Place the signal at any
grade crossing on your Lionel railroad, and passing trains will automatically lower the
gate.
2
Table of contents
Installing the 153C Contactor 3
Wiring your Auto Crossing Gate to a power source 4
Adjusting the Contactor 5
Operating the Crossing Gate 5
Connecting your Auto Crossing Gate to a 153IR Controller 5
Connecting your Auto Crossing Gate with the FasTrack track system 6
Replacing your Auto Crossing Gate’s lamp 7
Limited Warranty/Lionel Service 8
The following Lionel marks may be used throughout this instruction manual and are protected under law.
All rights reserved.
Lionel
®
, TrainMaster
®
, Odyssey
®
, RailSounds
®
, CrewTalk
™
, TowerCom
™
, DynaChuff
™
,
StationSounds
™
, Pullmor
®
, ElectroCoupler
™
, Magne-Traction
®
, CAB-1 Remote Controller
®
,
PowerMaster
®
, Lionel ZW
®
, ZW
®
, PowerHouse
®
, TMCC
®
, Lionelville
™
, Lockon
®
The name FasTrack
®
is used with permission from Pitsco, Inc.