3
Table of contents
Running your locomotive
LEGACY Control operations 4
TrainMaster Command Control (TMCC/Command Control) operations 5
Conventional transformer operations 6
Locomotive basics
Tender volume control location 7
Adding smoke fluid to your locomotive's smoke generator 8
Locomotive switch locations 9
Assigning your locomotive a new ID# (LEGACY and TMCC) 10
Lash-ups (for LEGACY operation only) 11
LEGACY Control System operations
The LEGACY CAB-2 Remote Controller 12
The Velocity Throttle 13
The Multi-Controller 13
The Train Brake Slider 13
The Warning Sound Controller 14
The Speed Bar 14
EFX Trim and EFX Bar Graph 15
Leaving the Preset Speed Screen 15
LEGACY RailSounds Sound System operations
LEGACY RailSounds sound system 16
LEGACY RailSounds Sequence Control 17
CrewTalk dialog and TowerCom announcements in the LEGACY environment 18
LEGACY RailSounds sound system dialog on a round trip 19
Installing a nine-volt alkaline battery 20
TrainMaster Command Control operations
CAB-1 Remote Controller commands 21
CAB-1 Remote Controller numeric keypad commands 22-23
Setting the smoke level 23
Conventional transformer operations
Using the LEGACY RailSounds sound system in the conventional environment 24
Activating CrewTalk dialog and TowerCom announcements 25
Locking your locomotive into a single direction 26
Odyssey II Speed Control system operations
Odyssey II Speed Control operations 27
Odyssey II Speed Control system LEGACY Control operation 27
Odyssey II Speed Control system TrainMaster Command Control operation 27
Odyssey II Speed Control system conventional transformer operation 27
Maintaining and servicing your locomotive
Reprogramming your locomotive to restore features 28
Lubricating your locomotive 29
Servicing your locomotive’s LEDs 30
Replacing the traction tires 30
Installing the O gauge front coupler 31
Locomotive diagnostics 31
Lionel Warranty 32
To Next Page
Loading...
