EasyManua.ls Logo

Lionelo Antoon Plus - Page 11

Lionelo Antoon Plus
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
‑ 11 ‑ EN
CHILD SAFETY SEAT). Set the h seat inclinaon posion (see: HOW TO ADJUST
SEAT INCLINATION ANGLE).
3. Press ISOFIX buon (19) to pull out both ISOFIX arms (18). Next grab the seat with
both hands, slide both ISOFIX arms in the fasteners located in the car couch unl the
arms (18) engage and you can hear a disncve „click”.
4. Push the seat towards the car seat as much as you can.
5. The ISOFIX buon indicator must be green on both sides; then you can be sure the
seat has been properly secured and placed.
6. Press the support leg adjustment buon (20) and then stretch out the leg and adjust
its length so that it touches the vehicle oor (indicator 9 will turn green when the
support leg is properly stretched).
7. Loosen the child safety seat belts and unfasten the buckle.
8. Put the child in the child safety seat, adjust the headrest height and and secure them
with child safety seat belts.
9. Tighten the belts by pulling the belt tension adjustment strap.
FORWARD-FACING POSITION (76 – 105 cm)
ISOFIX + support leg
See: g. 20
1.
If necessary, put ISOFIX pads (22) on ISOFIX connectors in the car. They help you sck
ISOFIX fasteners when car connectors are hard to access.
2.
Rotate the child safety seat to reach the forward-facing posion (see: HOW TO ROTATE
CHILD SAFETY SEAT). Set one of four seat inclinaon posions (see: HOW TO ADJUST
SEAT INCLINATION ANGLE).
3. Press ISOFIX buon (19) to pull out both ISOFIX arms (18). Next grab the seat with
both hands, slide two ISOFIX arms (18) in fasteners located in the car seat unl both
arms engage and you can hear a disncve „click”.
4. Push the seat towards the car seat as much as you can.
5.
The ISOFIX buon indicator (X) must be green on both sides; then you can be sure
the seat has been properly secured and placed.
6.
Press the support leg adjustment buon (Y), next stretch out the leg and adjust its
length so that it touches the vehicle oor (the indicator will turn green when the support
leg is properly stretched).
7. Loosen the child safety seat belts and unfasten the buckle.
8. Put the child in the child safety seat, adjust the headrest height and and secure them
with child safety seat belts.
9. Tighten the belts by pulling the belt tension adjustment strap.

Related product manuals