Lionelo Antoon Plus - Page 9

‑ 9 ‑ EN
2. Headrest is too high.
3. Headrest is correct.
HOW TO ROTATE THE CHILD SAFETY SEAT
1. In order to take the child out or put the child in the product comfortably:
• Pull out the base rotaon buon 360º (10).
• Next rotate the child safety seat in any direcon (360º).
•
When you can hear a disncve „click”, it means the child safety seat has been secured
in place. You can be sure the product has been properly secured.
See: g. 9.
Make sure the base rotaon buon has been secured in its original place aer changing the
direcon of the product.
2. Proper posion of the child safety seat in relaon to child’s height:
a. In a rear-facing posion – 40 – 105 cm
b. In a forward-facing posion – 76 – 105 cm
Note! The child safety seat rotated by 90 degrees in relaon to the original posion may
only be used to put the child in or take the child out of the product. When traveling, it is
forbidden to use the product if it is perpendicular to the traveling direcon
HOW TO ADJUST THE SEAT INCLINATION ANGLE
Grab the seat inclinaon lever (12), pull up and change the child safety seat inclinaon angle
(g. 10). You can choose 5 inclinaon angle posions, depending on the child size (g. 11)
0 – 18 kg
Rear-facing posion Forward-facing posion
40 – 105 cm
0 – 3 years of age
76 – 105 cm
15 months – 3 years of age
Posion no. 5
(lying)
Posion no. 1 Posion no. 2 Posion no. 3 Posion no. 4
It is forbidden to use the child safety seat in a forward-facing posion unl the child
turns 15 months of age!
In order to set the child safety seat in the posion 5:
1. Set the child safety seat in the fourth posion, in a forward-facing posion.
2. Press the base rotaon buon (10), rotate the product into a rear-facing posion.