Lionelo Braam - Car Safety & Component Identification; In-Car Safety Guidelines; Child Seat Component Identification

‑ 10 ‑EN
main points of contact, please consult the child safety seat manufacturer.
• For assembly with ISOFIX: please read the vehicle manufacturer’s manual.
•
Assemble the child safety seat in a rear-facing posi on if the child’s weight is lower
than 9 kg or when other size value is not exceeded.
Safety in the car:
To provide top safety to you and your passengers during the travel, make sure:
• Folding elbow rests are folded (ver cal posi on).
•
Any items which may cause damage in the car in case of collision have been properly secured.
• All passengers have fastened their seat belts.
Do not install the child safety seat on seats equipped with two-point safety belts!
See:  g. 1
Installa on in this place is allowed
Installa on in this place is forbidden
A – shoulder belt
B – hip belt
C – ISOFIX grips (required when assembling the child safety seat with belts and ISOFIX
system)
See:  g. 2
Installa on is this place is allowed
Installa on in this place is forbidden
Installa on in this place is allowed provided the airbag is inac ve
Installa on in this place is allowed provided the seat is equipped with three-point
safety belts and ISOFIX fasteners.
Descrip on ( g. 3 and 4)
A. Shoulder belt guide
B. Child safety seat covering
C. Belt protec ve cushions
D. Shoulder belt
E. Buckle holder
F. Belt unfastening bu on
G. Belt buckle
H. Crotch cover
I. Belt tension adjustment bu on
J. Belt tension adjustment