EasyManua.ls Logo

Lionelo Braam - Car Installation with ISOFIX (Part 2); ISOFIX Forward-Facing Installation (Groups II, III); Cleaning and Maintenance; Seat Care and Checks

Lionelo Braam
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
‑ 16 ‑EN
Put the child in the child safety seat and secure with safety belts of the child safety
seat. (See: g. 27)
6.
Installaon in a forward-facing posion, the child is secured with car seat belts
(group II, III, 15 - 36 kg).
Remove 5-point safety belts (see: g. 8 and 9)
Place the child safety seat on the car seat.
Turn the child safety seat to a forward-facing posion. To do so, press the base 360°
rotaon buon (M). (see: g. 13)
If necessary, put ISOFIX sheaths (Z) on ISOFIX connectors in the car. They facilitate
scking ISOFIX fasteners of the child safety seat when car connectors are hard to access.
Press ISOFIX buon (X) to extend both ISOFIX arms (V). Next grab the seat with both
hands, slide both ISOFIX arms rmly in the fasteners in the car seat unl the arms
anchor and you can hear a disncve „click”.
Push the product towards the car seat, press it against the car seat as much as you can.
Green indicator on ISOFIX buon (X) must be visible on both sides, then you can be
sure the seat has been properly secured and xed.
Press the support leg adjustment buon (Y), then slide the leg in and adjust its length
so that it is as short as possible and the indicator turns red.
Put the child in the child safety seat.
Pull the car seat belt.
Carry shoulder belts (D) through the guide in the headrest (A) marked in red.
Carry hip part of the belt through the hip belt guide (P) marked in red.
Carry both belts through the hip belt guide marked in red and fasten them.
Fasten car seat belts (see: g. 6). Check if the child safety seat has been properly xed.
(See: g. 25)
Informaon:
Check if the safety belt goes through the shoulder and if it is at a relevant distance
between the neck and shoulder – marker A and B (see: g. 22).
When fastening belts, you will hear a disncve „click”.
Tighten the belts; to do so, follow the direcon of arrows (see: g. 25).
Try to move the child safety seat to check its stability.
CLEANING AND MAINTENANCE:
Periodically check the seat for damage and wear.
If you nd any damaged parts, replace the seat.
Keep the child safety seat clean to prolong its life.
Do not expose the seat to sunlight for a long me.

Related product manuals