Lionelo Otto - Description (Fig. 1); How to Assemble

‑ 6 ‑EN
Warnings related to baeries and feeder cable
• Keep baeries out of reach of children.
• Insert baeries in the compartment in accordance with marking.
• Do not throw baeries into re as they may explode.
• If you do not use the product for a long me, please remove a baery from
the compartment.
•
Always remove a worn-out baery, otherwise it may leak or explode and
damage the product.
• Do not charge single-use baeries.
•
Do not mix baeries - old with new ones, or alkaline with standard or mulple-
charge baeries.
• Dispose of baeries in accordance with regulaons, throw them into special
containers.
• Check the feeder cable for potenal damage to the cable, plug, contacts and
other elements. If you detect any irregularies, do not use the feeder cable
anymore.
•
When using the product, use the feeder cable of suitable parameters and
recommended by the manufacturer (supplied).
• To make sure the product works, you need 4 LR14 baeries (not supplied)
or feeder cable (not supplied). The feeder cable parameters required: input:
100-240V ~ 50/60Hz 0.3A, output: 5V 1000mA.
Descripon (g. 1)
1. Product frames
2. Seat fabric covering
3. Bow
4. Cushion
5. Seat frames
6. Cushion fastening
7. USB cable
How to assemble
1. Unfold the legs of the baby swing so that they are stable on the at surface.
2.
Put the sound module on the frame of the baby swing, as showed in the gure
no. 2. The assembly is successful if you can hear a „click”.