Lionelo Timon - List of Components; How to Assemble; Locking Mechanism

‑ 7 ‑ EN
bedside sleeper and the maress of the adult bed.
12. Check the ghtness of the aachment system before each use
by pulling the bedside sleeper in a direcon away from adult bed.
13. If there is a gap between the bedside sleeper and the adult
bed DO NOT use the product.
14. Gaps should not be lled with pillows, blankets and other items.
15. DANGER! Always completely raise the drop side when not
aached to the adult’s bed.
16. WARNING: To avoid hazards from the child’s neck being
caught on the top rail on the side that is next to the adult bed,
the top rail must not be higher than the adult bed maress.
17. WARNING: To avoid risk of your child being strangled the
aachment system to the adult’s bed shall always be kept
away from and out of the crib.
LIST OF COMPONENTS
1. Baby bed’s frame with a base (g. 2)
2. Maress (g. 3)
3. Wheels (4 pcs) (g .4).
4. Fastening belts (g. 5)
HOW TO ASSEMBLE
1. Take the frame and a base out of the packaging carefully and place them on
a at surface.
2. Part lower elements of the bed’s frame unl you can hear a disncve click.
3.
Part upper elements of the bed’s frame unl you can hear a disncve click (g. 6).
4. Fasten the material under the bed’s base by wrapping a metal tube underneath
the bed with Velcro bands (g. 7).
5.
Li the tube and use snap fasteners to aach it to the top frame of the baby’s
bed (g. 8).
6. Buckle on both sides of the opening side.
7.
Press the wheels into the holes by the leg bases. They should engage
automacally. When they do, you will hear a disncve click (g. 9).
8. Put the maress inside (g. 10).
9.
In order to disassemble the wheels, press the buon (g. 20) with a at hard object.
LOCKING MECHANISM
Every wheel has a built-in locking mechanism. To lock a wheel, press the brake by