Lippert Components 285318 - User Manual

1
lci1.com 574-537-8900 Rev: 03.06.20
Power Tongue Jack
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0001301
Table of Contents
Introduction ............................................ 2
Additional Information Sources ........................ 2
Safety ................................................... 2
Parts List ................................................ 3
Resources Required ................................... 3
Prior to Installation ..................................... 3
Installation .............................................. 4
Operation ............................................... 5
Unhitching from Tow Vehicle .......................... 5
Hitching to Tow Vehicle ................................ 5
Manual Operation ...................................... 6
Troubleshooting ........................................ 7
Fuse ................................................... 7
Clutch .................................................. 7
Notes .................................................... 7
Power
Tongue Jack
Installation and
Owner’s Manual
(For Aftermarket Applications)
Power Tongue Jack Aftermarket KitPower Tongue Jack Aftermarket Kit
Part #Part # DescriptionDescription
285318
Power Tongue Jack with Footpad Kit and
Manual Crank Handle

Lippert Components 285318 Specifications

General

Brand	Lippert Components
Model	285318
Category	Jacks
Language	English

Summary

Introduction

Product Overview

Details the Power Tongue Jack's features, capacity, stroke, and intended use for trailer applications.

Safety Guidelines

General Safety Warnings

Read and understand all instructions and safety labels before installing or operating the product.

Parts and Preparation

Parts List

Lists components included in the Power Tongue Jack Aftermarket Kit PN 285318.

Resources Required

Lists tools and materials needed for installation, such as drill, sockets, and loom.

Pre-Installation Steps

Steps to take before installing, including removing the footpad and supporting the trailer.

Installation Guide

Mounting the Jack

Steps for sliding the jack leg through the coupler and aligning mounting holes.

Electrical Connections

Connecting the power wire to a 12V supply and using a 30 amp fused circuit.

Operation Procedures

Unhitching from Tow Vehicle

Steps to safely disconnect the trailer from the tow vehicle using the tongue jack.

Hitching to Tow Vehicle

Steps to safely connect the trailer to the tow vehicle using the tongue jack.

Manual Operation

Manual Unhitching

Procedure for manually operating the tongue jack to unhitch the trailer.

Manual Reconnecting

Procedure for manually operating the tongue jack to reconnect the trailer.

Troubleshooting Common Issues

Fuse Replacement

Information on the 30A fuse and causes of premature blowing, like low battery voltage.

Clutch Slippage

Conditions causing the clutch to slip: reaching limits or exceeding weight capacity.

Important Notes