Lippert Components MyRV - Circuit Management and Building; Assigning Device Titles and Groups

Rev: 05.19.2016
Page 5
MyRV™ Programming Manual
5. Select the relay (latching or reversing polarity) switch or tank sensor to assign a title (Fig. 7).
6. When window pops up select “Rename” (Fig. 8).
7. Select “Group”.
8. Select “Name”.
9. Press “Send” to set group and name selected (Fig. 9).
10. Repeat process for each function.
Circuit Building For MyRV™ Smart Switch
1. Press “Build Circuit” (Fig. 10).
Fig. 7 Fig. 8
Fig. 9
Fig. 10