Lippert Components MyRV - Multifunction Fuse Configuration; Fuse Programming Steps

Rev: 05.19.2016
Page 7
MyRV™ Programming Manual
Multifunction Fuse Programming
1. Enter the MyRV configurator screen by tapping the yellow LincPad Applications icon five (5) times (Fig.
15A). You will then be prompted to enter a four-digit password (Fig. 15B). The password is the last four
digits of the version number (Fig. 15C).
2. Choose the "Configurator" option (Fig. 16A).
C
3. Choose the "Show All Devices" option (Fig. 17A).
4. Choose the "By Product/Controller" option (Fig. 18A). This will display all of the products and
controllers connected to the Linc system.
5. Press and HOLD the "Multifunction 8-Output" option (Fig. 19A). You will then be prompted to
configure the fuses. Choose "OK" (Fig. 20A) to enter fuse configuration.
A
A
A
A
A
Fig. 15 Fig. 16
Fig. 17 Fig. 18
Fig. 19 Fig. 20
A
B