To Next Page
M
morrisdavidAug 2, 2025
What to do if my Lippert Components Tablet is not connecting to the OneControl® control panel?
- MMarie TapiaAug 3, 2025
If your Lippert Components Tablet isn't connecting to the OneControl® control panel, there might be a few reasons: 1. **Connection to the Hub:** Ensure the tablet is connected to the OneControl® Hub via the Wifi Manager application. If the signal is weak, get closer to the hub. If proximity doesn't help, try placing the tablet in the docking station for a wired connection. Also, consider moving the OneControl® Hub away from appliances like microwaves or refrigerators. 2. **Power to the System:** Check the power connections to the OneControl® hub, multi-function receiver, and digital switch. Repair or replace components as needed. 3. **Range:** You might be out of range of the OneControl® Hub. Try moving closer.
General
