Need help?Do you have a question about the Lippert Components OneControl HVAC Control 2.0 and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Brand | Lippert Components |
| Name | OneControl HVAC Control 2.0 |
| Power Supply | 12V DC |
| Compatibility | OneControl systems |
| Control Method | Remote control via mobile app |
| Control Type | HVAC |
| Connectivity | Bluetooth, Wi-Fi |
| Mobile App | Yes, OneControl app |
| Features | Zone control |
| HVAC Zones | Supports multiple zones |
Device requires 12V DC and cannot operate from AC power, which will cause damage and void warranty.
Compatible with single-stage LP gas furnaces, conventional AC units, and heat pump units.
Details operating voltage, temperature range, quiescent current, sink current, and relay drive current.
Capabilities switch must be set to match attached equipment like fan speed, AC unit, and furnace type.
Power the device on/off using the front button. Press and release to enter or exit sleep mode.
Locate and press 'OneControl® Control Panel' then press the HVAC icon to access HVAC controls.
Use the 'Home' icon to return to the main OneControl® home screen from any application.
Select HVAC mode (Heat/Cool, Heat, Cool, Off) and fan setting (High, Low, Auto) for climate control.
Adjust temperature setpoints by dragging circles. System status displays current temperature and mode.
Diagram shows appliance connections for Furnace, AC, Heatpump, Dual-speed Fan using a 715845 Controller.
Diagram shows appliance connections for Furnace, AC, Heatpump, Dual-speed Fan using a 406350 Controller.
To Next Page
