Lippert Components OCTP - System Operations; Awning Control; Bed Lifts Operation

Rev: 12.21.18 Page 3
CCD-0001440
System Operations
Press back button (Fig. 3A) in the top-left corner to return to the home screen at any time.
1. Awning, if equipped:
A. Pressing the Awning icon (Fig. 2) will allow you to access the awning control screen (Fig. 3).
B. Select an awning to operate.
I. To extend the awning, press the EXTEND button (Fig. 3B).
II. To retract the awning, press the RETRACT button (Fig. 3C).
2. Bed Lifts, if equipped:
A. Pressing the Bed Lifts icon (Fig. 2) will allow you to access the bed lift control screen (Fig. 4).
B. Select a Bed Lift to operate.
I. To raise the bed lift, press the RAISE button (Fig. 4A).
II. To lower the bed lift, press the LOWER button (Fig. 4B).
A
Fig. 3
B
C
Fig. 4
A
B