To Next PageTo Next PageWhat to do if Lippert Components Control Systems has no internet connection?
If your Lippert Components Control Systems indicates no internet connection, first check the internet hardware to ensure it's working correctly. You can also plug a laptop into the LAN and use a web browser to verify internet browsing. Finally, check with your cellular/satellite service provider to ensure your data service is activated and working.
Why is there no CAN bus traffic with my Lippert Components Control Systems CAN to Ethernet Gateway?
If your CAN to Ethernet Gateway is working but not showing CAN bus traffic, it could be due to a bad CAN bus connection. Check the two CAN bus connections on the CAN to Ethernet Gateway to ensure good electrical connectivity. Also, verify the CAN to Ethernet Gateway has been daisy-chained into the CAN bus and that the CAN bus in the unit has proper termination resistors on both ends. Ensure the system has been installed correctly. In rare instances, all unit CAN devices may be in a power-down state; verify unit mains are switched on.
What to do if Lippert Components Control Systems can't connect to OneControl Cloud?
If your Lippert Components Control Systems detects an internet connection but can't connect to the OneControl Cloud, this often means your router firewall is blocking traffic. Check your router settings to ensure proper operation. You can also plug a laptop into the LAN and use a web browser to verify internet browsing.
General| Power Source | 12V DC |
|---|---|
| Connectivity | Bluetooth, Wi-Fi |
| Control | Remote control of RV systems |
| User Interface | Mobile app |
| Operating Temperature | -20°C to 60°C |
| Functionality | Remote control and monitoring of RV systems, including lighting, HVAC, slide-outs, awnings, tank levels, battery status, and security features. Over-the-air updates. |
