Lippert Components Quick Drop Tongue Jack User Manual

2
lci1.com 574-537-8900 CCD-0001391 Rev:09.18.18
Quick Drop Tongue
Jack
®
Installation and Owner’s Manual
(For Aftermarket Applications)
Introduction
The Quick Drop Tongue Jack is a hand-cranked, top-
winding mechanical jack that features a drive-nut option
to raise and lower the tongue jack leg with the use of an
electric drill. The Quick Drop Tongue Jack has a lifting
capacity of 2,000 lbs. Do not exceed the capacity limit.
The design of this tongue jack is as stable, strong and
efcient as the rest of LCI’s tongue jack products, while
offering a cost efcient and quicker set-up/tear-down
option.
Additional information about this product can be
obtained from lci1.com/support or by using the myLCI
app. Replacement components can be ordered from
https://store.lci1.com/ or by using the myLCI app.
The myLCI app is available for free on iTunes
®
for iPhone
®
and iPad
®
and also on Google Play
™
for Android
™
users.
iTunes
®
, iPhone
®
, and iPad
®
are registered trademarks of
Apple Inc. Google Play
™
and Android
™
are trademarks of
Google Inc.
Safety
Read all instructions and safety labels before starting
installation of this product.
THIS SAFETY LABEL INDICATES THAT THE
FOLLOWING PROCEDURE MAY CREATE A
CONDITION WHERE SEVERE PRODUCT DAMAGE,
SERIOUS PERSONAL INJURY OR DEATH MAY
OCCUR IF STATED PRECAUTIONS ARE
NOT FOLLOWED.
Resources Required
• Cordless or electric drill or screw gun
• 9/16” socket
• ¾” socket
Parts List
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.
Quick Drop Tongue Jack Aftermarket Kit Part # 733926
No. Part # Description Qty
A 423192 Quick Drop Tongue Jack 1
B 710633 Quick Drop footpad kit 1
A
B

Lippert Components Quick Drop Tongue Jack Specifications

General

Brand	Lippert Components
Model	Quick Drop Tongue Jack
Category	Other
Language	English