Lippert Components Quick Drop Tongue Jack User Manual

6
lci1.com 574-537-8900 CCD-0001391 Rev:09.18.18
Quick Drop Tongue
Jack
®
Installation and Owner’s Manual
(For Aftermarket Applications)
Unhitching From A Tow Vehicle
1. Chock the tires of the trailer.
2. Make sure the foot pad of the Quick Drop Tongue Jack
is pinned securely in place with the clevis pin and hairpin
cotter pin (Fig. 6A).
3. Make sure the ground surface under the Quick Drop
Tongue Jack footpad is rm and level.
4. Make sure the crank handle is in its stored position
(Fig.4).
5. Unlatch the trailer coupler.
6. Use a ¾” drive socket with either a cordless or electric
drill or screw gun.
A. Insert the drive socket over the hex head of the drive
screw (Fig. 4A).
B. Rotate the drive screw in a clockwise direction to
extend the jack leg to clear the hitch ball.
7. Disconnect any wires, chains or sway control that may
be equipped between the tow vehicle and the trailer.
8. Move the tow vehicle a safe distance away from
the trailer.
Notes

Lippert Components Quick Drop Tongue Jack Specifications

General

Brand	Lippert Components
Model	Quick Drop Tongue Jack
Category	Other
Language	English