7
lci1.com 574-537-8900 Rev: 05.30.19
Solera
®
Slider
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0001264
Troubleshooting
Solera
®
Slide Topper Troubleshooting Chart
What’s Happening? What Should Be Done?
Rub marks appear on the fabric. Check that there is no debris in the track where fabric goes into the case.
Fabric sags or is loose.
Check tension on springs.
Make sure the end caps are properly secured.
Fabric will not roll up.
Check tension on springs.
Make sure there are no debris or foreign objects in the fabric opening or case.
Fabric will not unroll.
Make sure the spring clips that lock the tension for install have been removed
from both ends of the end caps.
Fabric appears to roll up
at an angle.
Make sure the rail that is mounted to the unit is square with the main housing
of the slide topper.
Make sure fabric is cut square.
To Next Page
Loading...
