Lippert Components Awnbrella User Manual

1
lippertcomponents.com 574-537-8900 Rev: 02.17 - Solera
®
Awnbrella
™
Awnbrella
®
Installation and Owner’s Manual
(For Aftermarket Applications)
Table of Contents
Introduction ............................................ 1
Awnbrella Parts List ................................... 2
Resources Required ................................... 3
Installation .............................................. 3
Spacing Awnbrella Arms ............................ 3
Drilling the Roller Tube ................................ 4
Mounting Hanger Blocks .............................. 5
Inserting Awnbrella Arms .............................. 5
Velcro
®
Stabilizers ..................................... 6
Proper Awning Extention for Awnbrella Arms ......... 7
Awnbrella
®
Installation and
Owner’s Manual
(For Aftermarket Applications)
Introduction
Give your awning extra support and better angle for water
runoff with the Solera
®
Awnbrella. Rust-resistant aluminum
bows hold fabric taut and arched so water and debris can
easily run off.

Lippert Components Awnbrella Specifications

General

Category	Accessories
Frame Material	Aluminum
Water Resistance	Yes
Material	Aluminum
Color	Black, White, Beige
Operation	Manual
UV Protection	Yes
Color Options	Black, White, Beige
Type	Awning

Summary

Understanding the Lippert Awnbrella

Lippert Awnbrella Parts Identification

Tools and Materials for Awnbrella Installation

Awnbrella Installation Procedure

Spacing Awnbrella Arms

Determine optimal spacing for Awnbrella arms based on awning width.

Drilling the Roller Tube

Step-by-step process for drilling holes in the roller tube for arm attachment.

Mounting Hanger Blocks

Securely affix hanger blocks to the RV exterior wall for arm support.

Inserting Awnbrella Arms

Detailed instructions for inserting and securing arms into roller tube and hanger blocks.

Attaching Velcro® Stabilizers

Applying Velcro patches to stabilize Awnbrella arms and prevent movement.

Proper Awning Extension

Correct awning extension positioning when Awnbrella arms are installed.