Rev: 01.24.19 Page 1 CCD-0002165
SOLERA SMART ARM™ LED LIGHTING
INSTALLATION GUIDE
TI-302
AWNINGS
Purpose
The purpose of this document is to provide installation instructions for Solera Smart Arm™ LED Lights.
Resources Required
• Wire strippers
• Crimpers
Prior to Installation
1. Verify the unit's battery is fully charged and connected to the electrical system.
2. To turn the awning on, press and hold the LOCK/UNLOCK button (Fig. 1A) on the touchpad for three
seconds. The button's green LED indicator light will illuminate when the awning is on.
3. Press and hold the extend arrow button (Fig. 1B) until the awning is fully extended.
Fig. 1
B
C
A
Green
LED
Green
LED
To Next Page
Need help?
General
