Rev: 09.19.2016
Page 2
TI-147
MANUAL AWNING INSTALLATION INSTRUCTIONS
TI-147
AWNINGS
Securing The Fabric
1. Roll the awning in and out several times to ensure that the fabric is square on the roll tube.
2. Secure the fabric in the awning rail by installing a #6 x ½” hex head screw through the fabric cord and
fabric 1” inside the edge of the fabric on both sides (Fig. 5).
NOTE: Seal all wall penetrations to protect against water intrusion (Fig. 6).
NOTE: All Solera Awnings 21' and under DO NOT require a center support or cradle.
Fig. 5
Fig. 6
As a supplier of components to the RV industry, safety, education and customer satisfaction are our primary concerns. Should you
have any questions, please do not hesitate to contact us at (574) 537-8900 or by email at customerservice@lci1.com. Self-help tips,
technical documents, product videos and a training class schedule are available at www.lci1.com or by downloading the MyLCI app.
To Previous Page
Loading...
