Lippert Components SolidStep 3.0 Owner's Manual

Rev: 07.19.18 Page 2
CCD-0001657
System Information
The SolidStep® 3.0 is a trailer entry step assembly mounted to the side of any trailer, providing an ease of
entry, regardless of level ground.
NOTE: Step identification tags are located under one of the step extrusions, typically the top full step.
TABLE OF CONTENTS
System Information 2
Safety Information 2
Operation 3
Release Steps 3
Storage of Steps 3
Adjust Leg Extension 3
SolidStep
®
3.0 Assembly 4
SolidStep
®
3.0 Components 5-7
Safety information
Moving parts can pinch, crush or cut. Keep clear and use caution.
No repairs should be attempted by anyone other than a qualied professional. The deployment
and retraction of the step assembly can cause injury if proper precautions are not taken. The step
assembly was designed for an operational weight rating of 400 lbs.
Always wear eye protection when performing service or maintenance to the trailer. Other safety
equipment to consider would be hearing protection, gloves and possibly a full face shield,
depending on the nature of the service.
Failure to follow the instructions provided in this manual may result in death, serious personal
injury, product or property damage or voiding of the component warranty.

Lippert Components SolidStep 3.0 Specifications

General

Brand	Lippert Components
Model	SolidStep 3.0
Category	Ladders
Language	English