Rev: 10.18.21 Page 26 CCD-0004098
10. Attach the two snaps holding the front panel and gate to the driver's side railing (Fig. 64A) and the one
snap holding the front panel to the curbside railing (Fig. 64B).
NOTE: An alternate version of the patio rail kit has a, "no-gate" option, which there will only a one snap on each
side holding the two front panels to the side panels.
Fig. 65
A/B
A
B
A
11. Attach the bungee (Fig. 65A) onto the front driver's side and curbside brackets (Fig. 65B), holding the
patio railings to the ramp door.
A
B
Fig. 64
To Next Page
Loading...