Rev: 10.27.22 Page 5 CCD-0005287
3. Figure 4 is assigned to “Manual Mode” button from menu screen (Fig. 2B). Each button, ex. Extend
Front (Fig. 4A) is a button that operates both front jacks. Each button is a pair of jacks and only extends
the jacks.
4. Figure 3 is the screen displayed during the leveling process.
5. During the, “Auto Level” process, (Fig. 1B), control sensed movement in the coach during leveling
process, too much time has passed or if control was calling to extend pair of jacks but saw zero
movement (angle change) meaning the cylinders have reached full stroke, or coach is parked on too
great of an incline (typically over 6 degrees) and cannot complete level process. The "Leveling Error"
screen (Fig. 5) will appear. Press Home (Fig. 5A) or Menu (Fig. 5B) icons to get out of this page.
6. During the, "Retract Jacks" (Fig. 1C), or in "Manual Mode", (Fig. 2B), Figure 6, "Jacks Are Retracting"
screen is displayed.
Fig. 3
Leveling In Progress
Fig. 4
Manual Mode
A
Fig. 5
Leveling Error
Fig. 6
Jacks Are Retracting
A B
To Next Page
Loading...
