Rev: 10.27.22 Page 6 CCD-0005287
7. Figure 7, "Parking Brake Error", will appear when no parking brake signal is received and there is
no pressure switch signal indicating jacks are still retracted. Screen prompted before auto level and
manual mode functions. Screen prompted for five seconds, then returns to home screen (Fig. 1).
If jacks are extended and parking brake signal is lost, jacks will automatically retract.
8. Figure 8, "Insufficient Voltage", screen may be prompted before or during “Auto Level”,
“Retract Jacks” or “Manual Mode” functions. This screen is prompted when the control is receiving
less than 10.7 volts.
Fig. 7
Parking Brake Error
Fig. 8
Insufficient Voltage
To Next Page
Loading...
