Lippert Level-up - Purge Procedure; Manual Override

12/15/2022
11
PURGE PROCEDURE
Reasons to purge:
• To remove air from fluid
• Jack replacement
• Power unit replacement
• Hose replacement
• Valve replacement
• Manifold replacement
• Pressure switch replacement
• After flush procedure
MANUAL OVERRIDE
¼” Hex Bit & Drill
Clockwise to RETRACT
Counterclockwise to EXTEND
Clockwise to OPEN
Counterclockwise to CLOSE
5/64 Hex
Wrench
5/32 Hex
Wrench
21
22