EasyManua.ls Logo

Lippert OneControl - Reading Water Tank Levels

Default Icon
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rev: 05.18.21 Page 10 CCD-0004329
Reading Water Levels
The caravan may be equipped with up to three clean water tanks. When a tank is full, it will show four blue
quadrants in a vertical stack (Fig 7).
NOTE: The number of tanks displayed is determined by the number of tanks installed on the caravan at
the factory.
As clean tanks are depleted, levels reduce by 25% increments, 1 quadrant at a time, and turn yellow. Levels
are reported as:
100% (full-4 of 4 quadrants)
75% (3 of 4 quadrants)
50% (2 of 4 quadrants)
25% (1 of 4 quadrants)
0% (empty-0 of 4 quadrants)
NOTE: As tanks are depleted or filled, the color of each quadrant may change. The point at which color
changes may be selected by the user in the Settings page.
The Grey Tank (Fig. 7A) is the caravan's dirty water and there will always be at least one Grey tank. The grey
tanks display will change color as the tanks begin to fill up with dirty water as follows (Fig. 8):
0% (empty-4 stacked dark grey quadrants)
25% (1 of 4 light grey quadrants)
50% (2 of 4 yellow quadrants)
75% (3 of 4 red quadrants)
100% (4 of 4 red quadrants)
Fig. 7
A
Fig. 8

Related product manuals