Lippert Thin Shade 806621 - Removing the Existing Door Window; Screw-Type Window Removal; Snap-In Window Removal

3
lci1.com 574-537-8900 Rev. 06.04.21CCD-0002703
Entry Door Window
Replacement with
Thin Shade Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
Remove Existing Window
Option A: Screw-Type Window
1. Remove the 16 Phillips head screws from the interior
window frame (Fig.1A).
Fig.1
Option B: Snap-In Window
1. Slide the 16 release tools (Fig.2A) into the 16 slots (Fig.3)
around the outside perimeter of the interior window frame.
slots
Fig.2
Fig.3
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
interior frame
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
interior frame
2. Support the window glass on the interior side to
prevent the glass from falling inward, causing it to pull
away from the interior frame.
NOTE: A second person is recommended to assist during
the removal of the interior frame.
3. Remove exterior frame and glass.