6
lci1.com 574-537-8900 Rev. 06.04.21CCD-0002703
Entry Door Window
Replacement with
Thin Shade Kit
Installation and Owner’s Manual
(For Aftermarket Applications)
Fig.7
3. Holding the top rail of the Thin Shade at an approximate
45-degree angle, insert one end of the rail into the corner
between the inner frame and glass (Fig.7A).
NOTE: Shade portion not shown for clarity.
4. Repeat this action on the opposite end of the top rail.
5. Press both ends of the rail up and latch in-place, moving
the top levers (Fig.6) in a right-to-left direction.
6. Holding the bottom rail at an approximate 45-degree
angle, insert one end into the corner between the inner and
outer frame (Fig.7B).
7. Repeat this action on the opposite end of the bottom rail.
8. Press both ends of the rail down and latch in-place,
moving the bottom levers in a left-to-right direction.
A
B
To Next Page
Loading...
