19
12. DISASSEMBLY, WITHDRAWAL FROM USE AND ENVIRONMENTAL PROTECTION
During disassembly (repair) keep general precautions for workshop works.
Protect hands (body) from getting wounded and affected by grease and oil. Use safety gloves
and tools in good technical condition.
Do not leave worn or used parts after repair (withdrawal from use) on field or farmyard. They
should be stored in a separate place (with limited access of personnel or animals) and regularly delivered
to scrap yards.
When refilling (replacing) grease, do not allow its spilling. Used grease should be stored in leak-
tight tanks (e.g. empty fresh grease tanks) and periodically delivered to petrol stations where tanks are
collected.
Left machine parts or elements, spilled grease, may cause an accident or natural environment
pollution and infringe regulations in force.
13. NOTES
To Next Page
Loading...
Need help?
General
