LPW4
G Build Engine
xed speeds
1500 | 1800 | 3000 | 3600 r/min
LPW4 G Build Engine
1
* Optional items standard on most builds.
OVERVIEW
The G Build engine is specifically designed as a Power
generating engine suitable for use in unregulated
emissions territories. It is durable, reliable and easy
to maintain with oil & filter changes up to 500 hours,
dependant on operational conditions. It is designed
for continuous operation in ambient temperatures up
to 52° (122°F) and a cold start capability down to -32°
(-25.6°F).
Note:
This engine does not comply with Harmonised International Regulated
Emissions Limits.
BASIC ENGINE CHARACTERISTICS
▪ diesel fuelled and approved for operation on biodiesel,
that conforms with ASTM D6751 and EN14214,
concentrations of up to 20%
▪ direct fuel injection
▪ 4 cylinders
▪ liquid cooled
▪ naturally aspirated
DESIGN FEATURES AND EQUIPMENT
▪ inlet and exhaust manifolds*
▪ fuel lift pump
▪ mechanical governing
▪ self-vent fuel system with individual
▪ fuel Injection pumps
▪ fuel lter/agglomerator
▪ thermostatically controlled cooling system with belt
driven coolant pump
▪ radiator with pusher fan and belt guard*
▪ gear driven positive displacement type
▪ lubricating oil pump
▪ spin on full flow lubricating oil filter
▪ high inertia flywheel to SAE J620: 7.5” *
▪ SAE 5 flywheel housing *
▪ 12V Starter motor *
▪ 12V battery charge alternator *
▪ oil pressure and coolant temperature switches *
▪ fuel control solenoid (energised to run)*
▪ skid base packing
▪ operators hand book (English)*
OPTIONAL ITEMS
A range of options are available that allows you to select
a specification that matches your requirements; Please
consult you Lister Petter Power Systems distributor.
To Next Page
Need help?
General
