DP-DL01D [EUM-E] 20
3.10 DMX-512 to DALI Patch
The “DMX-512 to DALI Patch” function is to make DMX-512 controller able to control DALI devices.
Please refer “DMX-512 to DALI System Diagram”.
1. Click “DMX-512 to DALI” tab
2. Set corresponding DMX-512 to DALI address mapping and click “Save” to store the change.
If DALI address 03 is patching to DMX-512 address 10, DMX-512’s channel 10 signal will control DALI
ballast whose address is 03.
To Next Page
Loading...