DP-DL01D [EUM-E] 9
3 EDX to DALI GUI
“EDX to DALI” is an application to configure DP-DL01D.
An EDX to Ethernet interface (PL-DP106E or DP-104E) is required to make “EDX to DALI” communicate
with DP-DL01D.
Please refer the previous EDX to DALI wiring diagram.
3.1 Install EDX to DALI
Install “EDX to DALI” application in Windows
3.2 Connect to EDX to Ethernet Interface
Run the application and enter the IP address of the network interface. Then click “Connect”.
Or click “Search” to search the EDX to Ethernet interfaces on the network.
Click “Search” button to show all interfaces on the network.
To Next Page
Loading...