20
FAQ
Q1： Motor does not work?
A1： Check if the motor wire is well connected; Whether the propeller is over-pressed and stuck to the motor; Check if there is large resistance
by turning the motor by hand. If the motor is damaged, replace the motor in time.
Q2: Litebee Wing can't fly?
A2: Check the motor installation; Check the battery power capacity. Calibrate the Litebee Wing before flying.
Q3:LiteBee Go programming can not recognize the radio transmitter?
A3:Install the radio transmitter driver in LiteBee Go for the first-time use, after finishing the installation, select the corresponding device ports.
Q4: How to switch the radio transmitter from Mode2 to Mode1?
A4:Connect the radio transmitter to the computer via the USB cable, and download Mode1 program on Litebee Go software.
Q5: LiteBee Wing’s propellers fall off in high frequency?
A5:Replace with new propeller.
Q6:How much weight can LiteBee Wing carry?
A6:Recommended under 10g.
To Next Page
Loading...