6
1.3.3.2 Maintenance
Capacitors in the drive may still be charged for a short time after shutting off the power. Wait
for the amount of time specified on the drive before any maintenance. Failure to comply could
cause electrical shocks to personnel. Besides, do not touch the heatsink which can be very hot
during operation. Replace the cooling fan only when the heatsink has cooled down after
shutting off the power. In addition, when a synchronous motor is coasting to stop, it
regenerates voltage to keep the drive terminals live even when the drive power is off. Wait
until the motor is fully stopped before drive maintenance. Failure to comply could cause
electrical shocks to personnel.
1.3.3.3 Wiring Tools
Use only the tools suggested by the terminal supplier during drive maintenance.
1.3.3.4 Transportation and installation
Do not explore the drive to the environment containing the halogens or DOP gas during
transportation or installation.
1.4 Warranty
1.4.1 Warranty Period
Contact local distributor for details.
1.4.2 Warranty Restrictions
Warranty is not applicable when the drive is not properly used according to the manual
regardless warranty period.
To Next Page
Loading...
