Lithonia Lighting ESXF1 P0

To Next Page

page 1

INSTALLATION INSTRUCTIONS

ESXF1/2_Rev 5/9/22

ESXF LED Floodlight

Proyector LED ESXF

Projecteur LED ESXF

INSTRUCCIONES DE INSTALACIÓN / DIRECTIVES D’INSTALLATION

Model Number(s)/ Número de modelo / Numéro des modèle

ESXF1 P0 SWW2 THK DDB

ESXF1 ALO SWW2 KY DDB

Description

3/16” Allen wrench

9/64” Allen wrench (Yoke)

Adjustable wrench

Descriptión

Llave Allen de 3/16 in

Llave Allen de 9/64 in

Llave ajustable

Description

Clé Allen 3/16 po

Clé (à douille) 9/64 po

Clé réglable

Protect yourself. Before installing, read the

entire instructions carefully and save them for

future reference.

Date installed:_____________

Failure to follow any of these instructions could

void product warranties. For a complete list

of product Terms and Conditions, visit www.

acuitybrands.com. Acuity Brands Lighting, Inc.

assumes no responsibilities for claims arising

out of improper or careless installation or

handling of its products.

Upon receipt of xture, thoroughly inspect for

any freight damage. All damage should be

reported to the delivery carrier. Compare the

catalog description listed on the packing slip

with the xture label on the inside of the housing

to be sure you have received the correct

merchandise.

Protéjase. Antes de instalar, lea estas

instrucciones cuidadosamente y guárdelas para

futura referencia.

Fecha Instalada:_____________

El incumplimiento de alguna de estas

instrucciones puede anular la garantía del

producto. Para obtener la lista completa de los

términos y las condiciones respecto al producto,

visite www.acuitybrands.com. Acuity Brands

Lighting, Inc. no se hace responsable por los

reclamos que puedan surgir de la instalación o

manipulación inadecuada o negligente de sus

productos.

Cuando reciba el aparato, inspeccione

minuciosamente para detectar posibles

daños por el envío. Informe todos los daños

a la compañía a cargo del envío. Compare

la descripción de catálogo incluida en el

comprobante de empaque con la etiqueta

del aparato en el interior del paquete para

asegurarse de haber recibido la mercadería

correcta.

Pour votre propre protection. Avant de

procéder à l’installation, veuillez lire attentivement

ces directives et les conserver pour référence

ultérieure.

Date de l’installation:_____________

Tout manquement au respect de ces instructions

pourrait rendre nulles les garanties. Pour une liste

complète des conditions générales du produit,

veuillez vous rendre sur www.acuitybrands.

com. Acuity Brands Lighting, Inc. n’assume

aucune responsabilité pour les réclamations

découlant d’une installation ou d’une manipulation

incorrectes ou négligentes de ses produits.

Lors de la réception du luminaire, procéder à

une inspection minutieuse à la recherche de

dommages éventuels subis lors du transport

Tous les dommages doivent être signalés au

transporteur livreur. Comparez la description du

catalogue indiquée sur le bordereau d’emballage

avec l’étiquette du luminaire à l’intérieur du boîtier

an de vous vous assurez que vous avez reçu les

bonnes marchandises.

Se requieren componentes de montaje Se requieren componentes de montaje

Requiere Sellador de Silicona

Compre por separado

HERRAMIENTAS REQUERIDAS:

Mounting Hardware and Mounting Hardware and Silicone Sealant

Required

Purchase Separately

REQUIRED TOOLS:

Quincaillerie de montage et agent d’étanchéité

à base de silicone requis

à acheter séparément

OUTILS REQUIS:

Model Number(s)/ Número de modelo / Numéro des modèle

ESXF2 ALO SWW2 KY DDB

Main Page

Need help?

Do you have a question about the Lithonia Lighting ESXF1 P0 and is the answer not in the manual?

The Lithonia Lighting ESXF LED Floodlight is a robust and versatile outdoor lighting solution designed for a variety of applications. This manual covers two main models: the ESXF1 P0 SWW2 THK DDB and ESXF1 ALO SWW2 KY DDB, as well as the ESXF2 ALO SWW2 KY DDB. The floodlight is engineered for durability and performance, offering features that cater to both ease of installation and long-term reliability.

Function Description:

The ESXF LED Floodlight is primarily designed to provide powerful and efficient illumination for outdoor spaces. Its LED technology ensures energy efficiency and a long lifespan, reducing the need for frequent bulb replacements. The floodlight is suitable for commercial, residential, and industrial applications where broad and bright lighting is required. It can be mounted in various configurations, including knuckle and yoke mounts, to direct light precisely where needed. The optional photocontrol feature allows for automatic operation, turning the light on at dusk and off at dawn, further enhancing energy savings and convenience. The adjustable lumen output and color temperature settings provide flexibility to customize the lighting to specific environmental and aesthetic requirements.

Important Technical Specifications:

The floodlight models offer different configurations in terms of photocontrol, color temperature, adjustable lumens, and articulation.

Photocontrol:
- ESXF1 P0: ON/OFF
- ESXF1 ALO & ESXF2 ALO: ON/OFF (with adjustable photocontrol for ESXF1 ALO and ESXF2 ALO, allowing customization of the light level at which the photocontrol activates)
Color Temperature (CCT):
- ESXF1 P0: 3000K/4000K/5000K (selectable)
- ESXF1 ALO & ESXF2 ALO: 3000K/4000K/5000K (selectable)
Adjustable Lumens:
- ESXF1 P0: NO, 2,500* only
- ESXF1 ALO & ESXF2 ALO:
  - High: 5,000*
  - Med: 3,000*
  - Low: 1,500*
  - High: 7,500*
  - Med: 5,500*
  - Low: 3,500*
  - High: 5,000*
  - Med: 3,000*
  - Low: 1,500*
  - High: 7,500*
  - Med: 5,500*
  - Low: 3,500* (Note: Asterisk indicates factory setting)
Articulation:
- ESXF1 P0: Not provided
- ESXF1 ALO & ESXF2 ALO: Articulation installed and plaque de montage comprise
Knuckle/Yoke:
- ESXF1 P0: Knuckle sold separately
- ESXF1 ALO & ESXF2 ALO: Yoke accessory included
Mounting Hardware:
- 3/16" Allen wrench (required)
- 9/64" Allen wrench (for yoke mount, required)
- Adjustable wrench (required)
- Silicone sealant (required, purchased separately)
Electrical: The fixture is designed for connection to a UL-certified junction box, properly installed and grounded. All wiring must comply with the National Electrical Code (NEC) and applicable local codes. UL-certified wire connectors are required.
Environmental: Designed for outdoor use, suitable for wet locations. Operating temperature limits should not be exceeded.

Usage Features:

Installation Flexibility: The floodlight supports both knuckle and yoke mounting options. The knuckle mount is designed for direct attachment to a 1/2" NPS hole in a compatible mounting apparatus, secured with Teflon tape or silicone sealant. The yoke mount allows for greater adjustability and can be secured to various surfaces.
Adjustable Light Settings: Users can select from multiple color temperatures (3000K, 4000K, 5000K) and lumen output levels (e.g., 1500, 3000, 5000, 3500, 5500, 7500 lumens depending on the model) to tailor the lighting to specific needs. These adjustments are typically made via switches located inside the fixture housing.
Photocontrol Option: Models with photocontrol allow for automatic dusk-to-dawn operation. The photocontrol can be adjusted to activate at different light levels, providing precise control over when the light turns on.
Easy Aiming: The fixture's articulation mechanism, particularly with the yoke mount, allows for precise aiming of the light. Allen wrenches are used to loosen and tighten the adjustment screws, enabling rotation and tilt adjustments.
Safety Precautions: The manual emphasizes critical safety measures, including disconnecting power before installation or maintenance, verifying correct voltage, and ensuring proper grounding. It also warns against direct eye exposure to the light source and touching the fixture while hot.
Product Protection: Instructions advise against connecting components under load, mounting in ways that could damage wiring, or exceeding maximum ambient temperatures. It also highlights the importance of proper ventilation and avoiding covering the LED fixtures with insulation or other materials that could impede cooling.
Electrostatic Discharge (ESD) Protection: Users are advised to wear personal grounding equipment during installation or servicing to prevent ESD damage to the LED components.

Maintenance Features:

Cleaning: The exterior of the refractor/lens may require occasional cleaning. It should be washed with a solution of warm water and a mild, non-abrasive household detergent, rinsed with clear water, and wiped dry. If dirt accumulates inside the optical assembly, the refractor/lens should be wiped and cleaned as described, and damaged gaskets replaced as needed.
Long-Term Reliability: The LED light engine is designed for low maintenance, eliminating the need for frequent bulb replacements. The manual states that the LED light engine is not user-serviceable.
Troubleshooting Guide: A basic troubleshooting guide is provided to help diagnose common issues, such as verifying power, line voltage, wiring, and photocell settings. For more complex issues, technical support contact information is provided.
Warranty: The product comes with a 5-year limited warranty. However, failure to follow installation instructions or improper handling can void the warranty.
Recycling Information: For information on recycling LED electronic products, users are directed to www.epa.gov.

In summary, the Lithonia Lighting ESXF LED Floodlight is a high-performance, adaptable, and user-friendly lighting solution for various outdoor environments, designed with an emphasis on safety, efficiency, and ease of maintenance.