Lithonia Lighting IBL Series - User Manual

Page 1 of 8
FEATURES & SPECIFICATIONS
INTENDED USE — Ideal one-for-one replacement of conventional HID and fluorescent high bay systems. Appli-
cations include warehousing, manufacturing, gymnasiums, and other large indoor spaces with mounting heights
up to 60'. Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate.
Click here for Acrylic-Polycarbonate Compatibility table for suitable uses.
CONSTRUCTION — Lightweight aluminum heat sink designed to perform in ambient temperatures up to 55 °
C with lumen droop less than fluorescent due to precision thermal engineering for maximum naturally convective
cooling. Structural elements such as the channel and end caps are fabricated from steel for maximum rigidity.
Hard-tooled reflectors, utilizing reflective Alanod® MIRO-5® aluminum, for precise and repeatable photometry.
Semi-diffuse lens optional to provide glare control – may be inverted for gloss or matte side down. Wireguard
attachment points provided.
OPTICS — Narrow and wide distributions available to meet both horizontal and vertical light level require
-
ments. Reflectors feature precision-formed optics utilizing reflective Alanod® MIRO-5® aluminum to achieve
narrow distribution and white polyester powder coat to achieve wide distri bution. Semi-diffuse lens optional
to provide glare control and LED protection.
ELECTRICAL — L95 at 60,000 hours (only 5% loss) with a predicted life of more than 100,000 hours. Utilizes
a 90°C case temperature driver for maximum life at high temperatures. 0.90 power factor and 10kA/10kV level
of surge protection is standard. Available as 120-277V or 347-480V input.
0-10V dimming standard for a dimming range of 100% to 10%; dimming source current is 150 microA.
WIRELESS NETWORKING — XPoint™ Wireless technology creates a mesh network to ensure commu
-
nication between fixtures, sensors and wall stations facility-wide. This option provides superior lighting
management capabilities including granular control, configuration and custom grouping for increased
energy savings.
INSTALLATION — Suitable for suspension by chain, cable, surface-mounting bracket, hook monopoint
or single (pendant) monopoint. Surface mounting not recommended without optional surface mounting
bracket. To maintain high ambient listing, fixture should be mounted at a minimum plenum height of 24".
LISTINGS — CSA certified to US and Canadian safety standards. Damp location listed. Suitable for ambient
temperatures from -40°F (-40°C) to 131°F (55°C) when suspended 24" from ceiling. Patent pending.
DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of
this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at
www.designlights.org/QPL to confirm which versions are qualified.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
LED High Bay
IBL
Patent Pending
Catalog
Number
Notes
Type
INDUSTRIAL IBL
D
I
M
M
A
B
L
E
Unlensed (standard)
12-30L pictured
Lensed (optional)
48-60L pictured
Capable Luminaire
This item is an A+ capable luminaire, which has been designed and tested to provide
consistent color appearance and out-of-the-box control compatibility with simple
commissioning.
• All configurations of this luminaire meet the Acuity Brands’ specification for
chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight® or XPoint™ Wireless
control networks marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details

Summary

Features and Specifications

Intended Use

Ideal replacement for conventional HID/fluorescent high bay systems for warehousing, manufacturing, and gymnasiums.

Construction

Lightweight aluminum heat sink, steel structural elements, and Alanod® MIRO-5® reflectors for precise photometry.

Optics

Narrow and wide distributions available, precision-formed optics, optional semi-diffuse lens for glare control.

Electrical

L95 at 60,000 hours, 90°C case temp driver, 0.90 PF, 10kA/10kV surge protection, 120-277V or 347-480V input.

Wireless Networking

XPoint™ Wireless technology for mesh network, superior lighting management, granular control, and energy savings.

Installation

Suitable for suspension by chain, cable, surface-mount bracket, hook/single monopoint.

Listings

CSA certified, Damp location listed, suitable for ambient temps -40°F to 131°F. Patent pending.

Warranty

5-year limited warranty. Complete terms available online.

Ordering Information

Series and Lumens

Available lumen packages from 12L (12,000) to 60L (60,000) lumens with various distributions.

Lens Options

Options include no shielding or semi-diffuse acrylic lenses.

Voltage and Color Temperature

Supports MVOLT, 120V, 277V, 347V-480V with CRI/CCT options like LP735, LP740, LP835, LP840.

Available Options

Includes fuse, cord sets, controls (motion sensors, photocells), and integrated modular plug.

Accessories

Mounting options, wire guards, and field-installable lens assemblies.

Dimensions

Fixture Lengths

Details dimensions for 12L-30L and 48L-60L models, noting differences in LED rows.

Mounting Details

Illustrates mounting configurations, including pendant monopoint.

Operational Data and Characteristics

Operational Data

Delivered lumens and lumen multipliers at various ambient temperatures and distributions.

Characteristics

Wattage, dimensions, weight, and comparable light sources for each lumen package.

Projected Lumen Maintenance

Lumen maintenance factor over operating hours, showing degradation over time.

Lumens vs. Ambient Temperature

Lumen multiplier based on ambient temperature, from 0°C to 55°C.

Photometrics

Reference to website for photometric data.

LSXR - Fixture Mount Sensor

LSXR Sensor Configuration

Details LSXR sensor compatibility with CMRB and old style sensor nomenclature.

Single Relay Configuration

Ordering information for single relay LSXR sensors with lens and dimming/photocell options.

Dual Relay Configuration

Ordering information for dual relay LSXR sensors with lens and operating mode options.

Replacement Lenses

Available replacement lenses for LSXR sensors, including package quantities.

LSXR Coverage Patterns

High Mount 360° Lens (#6)

Coverage patterns for high mount 360° lens, detailing radial coverage at different heights.

High Mount Aisleway Lens (#50)

Coverage patterns for high mount aisleway lens, ideal for warehouse racking.

Low Mount 360° Lens (#10)

Coverage patterns for low mount 360° lens, best for large motion detection.

Integrated Modular Plug (IMP) and RELOC-Ready Luminaire

IMP System

Allows plug-and-play of accessories like sensors, photocells, and relays via integrated modular plug.

RELOC-Ready Luminaire

Features RRL connectors for Quick-Flex, System 820, and OnePass systems for simple installation.

Compatible RELOC Cables

Lists compatible RELOC cables for industrial luminaires, shipped and ordered separately.

Options and Accessories

Reflectors

Details wide distribution with white paint and narrow distribution with Alanod® MIRO®.

Wire Guard

External wire guard to protect light engine from impact, field or factory installed.

Diffuser

Optional semi-diffuse acrylic diffuser, field or factory installed.

Embedded Occupancy Sensor

Factory installed sensors (SFR30/SFR7) for enhanced protection and performance.

Surface Mount Bracket

Bracket for rigidly attaching fixture to a hard ceiling.

Pendant Monopoint Bracket

Bracket for single-point mounting using 3/4" rigid conduit.

Hangers

Various lengths of aircraft cables and chains with or without V-hooks.

Cord Sets

Available in various lengths with or without molded plug, white is standard.

Integrated Modular Plug (IMP)

Factory installed option allowing field installation of modular accessories.

Lithonia Lighting IBL Series Specifications

General

Brand	Lithonia Lighting
Model	IBL Series
Category	Outdoor Light
Language	English