
Do you have a question about the Lithonia Lighting CNY LED and is the answer not in the manual?
| Category | Outdoor Light |
|---|---|
| Manufacturer | Lithonia Lighting |
| Model | CNY LED |
| Light Source | LED |
| Color Temperature | 4000K |
| Voltage | 120-277V |
| Mounting | Wall Mount |
| Material | Aluminum |
| IP Rating | IP65 |
| CRI | 80 |
| Housing Material | Die-Cast Aluminum |
| Lens Material | Polycarbonate |
| Finish | Dark Bronze |
| Weight | 8 lbs |
Failure to follow instructions may void warranties; manufacturer not liable for improper installation.
Inspect for freight damage, report to carrier, and verify merchandise against packing slip.
Keep combustible materials away from the fixture and do not operate near heat-affected substances.
Avoid connecting under load, damaging wires, restricting ventilation, or exceeding temp limits.
Disconnect power before installation/servicing. Verify voltage and follow NEC codes for wiring.
Wear gloves and safety glasses. Avoid direct eye exposure to light source.
Allow fixture to cool before handling. Do not touch enclosure, lens, or light source.
This equipment complies with FCC rules for digital devices, designed to prevent harmful interference.
Register warranty online. Failure to follow instructions may void warranty.
Lists necessary tools for installation, along with mounting hardware and sealant.
Instructions for detaching housing, pulling wires, mounting backplate, making connections, and reattaching housing.
Instructions for detaching housing, mounting backplate, feeding wires through conduit, making connections, and reattaching housing.
Instructions for detaching housing, removing plug, feeding wires through conduit, making connections, and reattaching housing.
Guide for adjusting CCT and lumen settings using the side switch.
Ensure power is off. Connect fixture to supply wires rated for 75°C. Connect ground and supply wires.
Verify power, wiring, and line voltage. Note incompatibility with dimmers/motion sensors.
Clean with mild soap and water. Do not use abrasives. No user-serviceable parts inside.
Loading...