To Next PageTo Next Page
Need help?Do you have a question about the Little Giant Rock Lock and is the answer not in the manual?
General instructions and safety precautions before starting the replacement procedure.
Lists and illustrates the parts included in the replacement kit.
Step-by-step instructions with illustrations for replacing the outer assembly.
This document outlines the procedure for replacing the outer assembly on Little Giant Ladder Systems Rock Lock ladders. The instructions emphasize safety and proper handling throughout the replacement process.
The Little Giant Ladder Systems Rock Lock outer assembly replacement kit is designed to allow users to replace a damaged or worn outer assembly on compatible Rock Lock ladders. The Rock Lock system is a key feature of these ladders, enabling the secure engagement and disengagement of the outer assembly from the inner assembly. This mechanism ensures the ladder's stability and adjustability during use. The replacement process involves disengaging the existing outer assembly, removing it, and then installing a new one, followed by re-engaging the Rock Lock tabs to secure the new assembly. This repair kit helps extend the lifespan of the ladder by allowing for the replacement of a critical structural component, rather than requiring the purchase of an entirely new ladder.
The replacement process is designed to be straightforward, though it requires careful attention to detail to ensure safety and proper functionality. Users are instructed to first push down on the Rock Locks to disengage them. This action releases the outer assembly from the inner assembly, allowing for its removal. The old outer assembly is then to be removed and discarded. The new outer assembly is subsequently put in place. The final step involves re-engaging the Rock Lock tabs, which securely locks the new outer assembly to the inner assembly. This sequence ensures that the ladder remains safe and functional after the replacement. The Rock Lock mechanism itself is a user-friendly feature, allowing for quick and secure adjustments of the ladder's configuration. The clear visual instructions, combined with the step-by-step guidance, aim to make the replacement accessible to users who follow the instructions carefully.
The document highlights several critical maintenance features and safety precautions. Before beginning the replacement, users are strongly advised to read all instructions completely. If any part of the instructions is unclear, they are encouraged to contact customer service for assistance, emphasizing the importance of understanding the process fully. A crucial initial step is to verify the kit's compatibility with the specific ladder model. This prevents incorrect parts from being installed, which could compromise safety.
Before installation, users must identify all components included in the kit. If any components are missing or damaged, contact with Customer Care is required, and substitution of components is strictly prohibited. This ensures that only genuine and intact parts are used for the repair.
A thorough inspection of the ladder is mandated before installing the kit. Any damaged or missing ladder parts must be repaired or replaced using only Little Giant Ladder Systems repair or replacement parts. If the ladder cannot be repaired, it must be discarded. This pre-installation inspection is a vital safety measure, as using a ladder with pre-existing damage, even after replacing the outer assembly, could lead to serious injury. The document explicitly states, "DO NOT USE A DAMAGED LADDER!"
The instructions also serve as a guide for ongoing maintenance awareness. By understanding how the Rock Lock system works and how the outer assembly is secured, users can better identify potential issues during routine ladder inspections. The emphasis on using only genuine parts and contacting customer service for any uncertainties reinforces a culture of safe and proper ladder maintenance, ultimately contributing to the longevity and safe operation of the Little Giant ladder.
General| Material | Aluminum |
|---|---|
| Type | Telescoping |
| Weight Capacity | 300 lbs |
| Max Height | 17 ft |
| Closed Height | 4 ft 7 in |
