How to stop Little Giant Water Pump from cycling continually?
To stop your Little Giant Water Pump from cycling continually, remove the check valve and inspect it for proper operation. A leaking check valve is a possible cause for this issue.
What causes a Little Giant Water Pump to cycle continually?
General| Horsepower | 1/30 HP |
|---|---|
| Type | Condensate Pump |
| Voltage | 115V |
| Discharge Size | 3/8 in. O.D. |
| Model | VCMA-20ULS |
| Power Cord Length | 6 ft |
| Switch Type | Float Switch |
Explains DANGER, WARNING, CAUTION, NOTICE, IMPORTANT, and hazard symbols.
Guidance for qualified personnel, potential hazards, and general warnings before starting.
Details high voltage, electrical shock, bodily injury, equipment damage, and operational risks.
Provides technical specifications including model, voltage, HZ, Amps, Watts, and weight.
Details the pump's performance based on head pressure (GPH/LPH).
Instructions for unpacking, mounting location, and preparing the pump for installation.
Guides on cutting and connecting inlet and outlet tubing for proper water flow.
Details on wiring, grounding, and connecting to power supply to prevent shock.
Recommendations for voltage, GFCI circuits, and dedicated circuits.
How to connect the pump's power cord to the power supply.
Instructions for wiring the auxiliary high-water level switch to a low-voltage circuit.
Explains two methods for configuring the high-level switch for different functions.
Step-by-step guide to test the pump's float switches and overall operation.
Routine inspection and cleaning procedures for the pump and system every six months.
Common problems, their probable causes, and corrective actions for pump issues.
Specifies the warranty duration from the date of purchase or manufacture.
Details the process for submitting a warranty claim and company's responsibilities.
Lists exclusions and conditions under which the warranty is void.
To Next Page