6
Tips: In order to ensure a stable Bluetooth connection whilst riding, use a smartphone holder
and place the phone on your handlebars .
SOS Alert(need to be connected to LIVALL Riding APP)
The helmet has a fall detection sensor which sends a signal to the LIVALL Riding APP via Bluetooth technology
when a fall is detected. Then the APP will send an SOS message to a pre-arranged emergency contact.
Power off
Hold the power button at the back of the helmet for
several seconds until all the LED taillight tums off.
Charge
When the soft rubber lid with “ ” image is opened, the Magnetic charging port will be seen. Insert a USB cable into
the USB Charging cable interface of the helmet. Charging starts when the middle area LEDs light up. During charging,
when the middle area LEDs stop blinking and turns off, charging is completed.
To Next Page
Loading...
