Need help?Do you have a question about the Livoo DOC239 and is the answer not in the manual?
The Livoo Crepe Maker XXL is a versatile kitchen appliance designed for domestic use, allowing you to effortlessly prepare delicious crepes. This instruction manual provides comprehensive guidance on its safe and effective operation, ensuring a satisfying cooking experience.
The primary function of the Livoo Crepe Maker XXL is to cook crepes. It features a large cooking plate that allows for the creation of generously sized crepes. The appliance is equipped with a thermostat, enabling you to control the cooking temperature to achieve your desired level of doneness, from lightly golden to crispy. The included spatula and T-spreader are essential tools for spreading the batter evenly and flipping the crepes with ease.
Before its initial use, it is crucial to prepare the crepe maker by removing all packaging materials and stickers. The cooking plate should be wiped clean with a damp cloth and thoroughly dried. Once prepared, the appliance is ready for operation. To begin, plug the unit into a power outlet and turn the thermostat button. The power indicator light will illuminate, signaling that the unit is on. For preheating, turn the thermostat to the maximum position. The temperature light will turn off when the plate has reached the optimal cooking temperature, indicating it's ready for use.
To cook a crepe, pour a small amount of batter onto the center of the preheated cooking plate. Using the batter spreader, quickly spread the batter in circular movements until the desired diameter of the crepe is achieved. Allow the crepe to cook until its top surface is no longer runny and it can be moved slightly on the cooking plate. Then, insert the spatula underneath the crepe and carefully turn it over to cook the other side. Continue cooking until the crepe reaches a golden color. Once cooked, remove the crepe from the plate using the spatula. If you notice that the last crepe cooked too dark, it is advisable to reduce the temperature before making your next one. After you have finished cooking, switch off the unit by turning the thermostat button and unplug it from the socket. Always allow the appliance to cool completely before cleaning and storing.
The Livoo Crepe Maker XXL is designed for ease of use, but it's important to follow safety guidelines. Always connect the appliance to a wall outlet that is properly grounded. Do not place the crepe maker near the edge of a bench or table during operation, and ensure the surface is dry, level, clean, and free of liquids or other substances. Avoid using the crepe maker on a metal surface, such as a sink drain board. It is crucial not to touch hot surfaces during operation; always use the provided spatula and spreader. Never leave the device unsupervised when it is working. Make sure to switch it off and disconnect it when not in use, before cleaning, or if left unsupervised.
This appliance can be used by children aged 8 years and above, as well as persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, provided they have been given supervision or instruction concerning its safe use and understand the associated hazards. Children should not play with the appliance. Keep the appliance and its cord out of reach of children younger than 8 years.
Do not use the device if the grip or power cable is damaged, in case of malfunction, if the device was damaged in any way, if it fell into water, or if you dropped it. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard. No repairs should be attempted by the user. To reduce the risk of electric shock, never operate this product with wet hands, spill liquid into the product, or submerge it in water. Do not use the appliance or the plug with wet hands. Do not let the cord hang over the edge of a table or counter or touch hot surfaces. When disconnecting the cable, always pull from the plug itself, not the cable. During use, always unwind the power cable completely from its accommodation to prevent overheating. Do not place the appliance on or near a hot gas burner or a heated oven.
Maintaining the Livoo Crepe Maker XXL is straightforward, but it requires adherence to specific cleaning instructions to ensure its longevity and safe operation. Always clean the appliance after every use. Before cleaning, ensure the unit is switched off and unplugged, and allow it to cool down completely.
It is important to note that you should never use a wire brush or any abrasive items or liquids to clean the appliance, including the baking plate, base, and accessories, as this can damage the non-stick coating and surfaces. Never immerse the appliance base in water.
To clean the baking plate, simply wipe it with a damp cloth. If baked-on food residues cannot be removed with a damp cloth, you can brush a little oil onto the affected areas. Allow the oil to sit for approximately 5 minutes, then wipe it off with a damp cloth and dry thoroughly before storing the appliance. This method helps to loosen stubborn food particles without damaging the surface.
Keeping the appliance clean at all times is essential, especially since it comes into direct contact with food. Regular and proper cleaning will help maintain the hygiene of your crepe maker and ensure it continues to function effectively for many uses.
General| Category | Kitchen Appliances |
|---|---|
| Model | DOC239 |
| Brand | Livoo |
| Voltage | 220-240V |
| Frequency | 50-60 Hz |
| Material | Stainless Steel |
To Next Page
