This document provides comprehensive instructions for the Livoo Mini Crepes Maker, designed to help users achieve complete satisfaction with their product. It emphasizes the importance of reading the manual thoroughly before first use to prevent misuse, damage to the appliance, or injury to the user. The manufacturer disclaims responsibility for damages resulting from incorrect use or improper handling.
The Mini Crepes Maker is designed for household use, allowing users to easily prepare mini crepes, pancakes, or blinis. Its primary function is to cook small, round crepes efficiently.
General Usage Instructions:
Before using the appliance for the first time, it is crucial to remove all packaging. The cooking plate should be wiped with a damp cloth, dried, and then a teaspoon of oil should be spread on it, with any excess wiped off.
To operate the device:
- Insert the flex cable into the appliance and plug it into a power outlet.
- Allow the cooking plate to preheat for 8 to 10 minutes. It is normal to observe a small amount of smoke and odor during the initial use.
- A small amount of butter can be placed on the cooking plate and spread evenly.
- Pour a small quantity of crepe batter onto the round circles of the cooking plate. The amount of batter should be adjusted based on the desired thickness: a full quantity for pancakes or blinis, and less for thinner crepes or wraps. Users can then add their preferred toppings.
- Cook the crepes for approximately 2 minutes on each side, or until they are golden brown. Pancakes and blinis may require a longer cooking time. A spatula should be used to turn the crepes. It is important never to rest plastic or wooden spatulas on the hot plate to avoid damage.
- Once cooked, remove the crepe from the plate. After use, unplug the appliance and allow it to cool completely before cleaning and storing.
Safety Precautions and Warnings:
Several safety guidelines are provided to ensure safe operation and prevent hazards:
- Voltage Compatibility: Before use, verify that the voltage of your wall outlet matches the rated voltage of the appliance.
- Power Cord: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard. The cord should not be allowed to hang over the edge of a table or counter, nor should it touch hot surfaces.
- Electric Shock Prevention: To reduce the risk of electric shock, never operate the product with wet hands, spill liquid into the product, or submerge it in water.
- Hot Surfaces: Do not touch hot surfaces during or immediately after operation. Always use the handles or knobs provided.
- Supervision: Close supervision is necessary when the appliance is used near children or individuals with infirmities.
- Placement: Do not place the appliance on or near a hot gas burner or a heated oven. It should be placed on a flat, stable, heat-resistant surface. Cooking appliances should be positioned stably with handles (if any) placed to avoid spillage of hot liquids.
- Outdoor Use: The appliance is intended for household use only and should not be used outdoors.
- Children and Unfamiliar Users: To avoid personal injury, this product should not be operated by children or individuals unfamiliar with these instructions. Children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, can use the appliance if they have been given supervision or instruction concerning its safe use and understand the associated hazards. Children should not play with the appliance.
- Cleaning and Maintenance by Children: Cleaning and user maintenance should not be performed by children unless they are older than 8 years and supervised.
- Appliance and Cord Reach: Keep the appliance and its cord out of reach of children less than 8 years old.
- External Timers: The appliance is not intended to be operated by means of an external timer or separate remote control system.
- Immersion: The appliance must not be immersed in water.
- Spillage: Avoid spillage on the connector.
- Misuse: Potential injury can result from misuse.
- Residual Heat: The heating element surface will be subject to residual heat after use.
- Surface Temperature: The temperature of accessible surfaces may be high when the appliance is operating.
- Food Contact Surfaces: It is absolutely necessary to keep the appliance clean at all times, especially surfaces that come into direct contact with food. Refer to the "cleaning" paragraph for specific instructions on cleaning surfaces in contact with food or oil.
- Competent Electrician: In case of repairs, a competent qualified electrician (after-sales department of the producer or importer, or any qualified, approved, and competent person) should perform the work to avoid danger. The appliance should be returned to this electrician for any necessary repairs.
Maintenance and Storage:
Proper cleaning and storage are essential for the longevity and safe operation of the Mini Crepes Maker.
- Cleaning Caution: Do not use a wire brush or any abrasive items or liquids to clean the appliance.
- Never Immerse: The appliance should never be immersed in water.
- Unplug Before Cleaning: Always remove the plug from the socket before cleaning the appliance and ensure that it has completely cooled down.
- Cleaning the Baking Plate: Clean the baking plate with a sponge.
- Cleaning the Base: Use a damp cloth to clean the appliance base.
Environmental Responsibility:
The document also includes information regarding the correct disposal of the product, adhering to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). The crossed-out wheeled bin symbol indicates that the product should not be disposed of with other household waste at the end of its working life. This is to prevent harm to the environment and human health from uncontrolled waste disposal. Users are encouraged to separate the appliance from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact their retailer or local authority office for details on how to dispose of the item safely and environmentally.
The manufacturer reserves the right to make modifications to the product without advance notice, demonstrating a commitment to continuous improvement.
Need help?
General
To Next Page
